Просмотр исходного текста страницы MarlenaFrancisco488

In 2005, the P.R. Skate, LLC introduced its Pallet Rack Moving System to the Material Handling business. The P.R. Skates pallet rack moving system is a pallet rack accessory that changes just how pallet rack could be shifted keeping service down time and labor expenses. 

Before going pallet stand from one location to a different location was time and frustrating consuming. The process of shifting pallet rack first begins with unloading all of the stored substance from the storage process (pallet rack) and before the new place is ready finding a temporary home for this. Following the storage system has been unloaded, the tear down or trial of the sheet would begin. The tear down approach seems to be less time consuming than the rebuilding of the storage system but equipment such as forklifts and scissor lifts are importance of both the tear down and rebuilding of the storage system adding another charge to the project. After the pallet rack is torn down or disassembled, the factors would be stacked and arranged for steady action to the brand new location. Upon arrival at the new area, re-assembly of the pallet rack would continue. After the storage system is re-assembled and anchored to the floor, the pallet rack is preparing to store material. Sounds easy and it's but very time intensive and extensive downtime of the service must be likely. 

Using a pallet rack moving methods, pallet rack could be moved and moved in 1/3rd of the time. The system is made to shift the pallet rack unchanged with substance still on the storage system. Down time, labor costs, and equipment costs are saved because of no re-assembly of the pallet rack, and minimal product displaced, no rack demolition. 

The method is simple when working with a rack moving system. First you would position the rack on the skates and enhance the pallet rack utilizing the training construction. This technique might be done virtually by one individual. The pallet rack is currently ready to go to the brand new area, when all the storage process (pallet rack) is on the skates. Now it'd be required for more folks to help in the process to help push and drive the going rack. After the rack has been moved to the new site, the rack would be put off the skates and reduced to a floor. Again just one person could do that the main process. The past step would be to anchor the loading. Once attached the process is complete and there is little to no product or products to share in the storage system. 

By using a pallet rack moving program, you can place it on wheels (skates), now lift your pallet rack up and move it to its new location with little product displacement. The moving system is simplistic in design and simple to use saving around 2/3rds of the normal project costs. 

The moving system contains skates and a training assembly. The skates are available in both HD (heavy duty) and LD (lite duty) models which have capacities which range from 5,000 pounds. to 12,000 pounds. Extra information are available at www.palletrackskate.com. [http://www.youtube.com/watch?v=-wMZfWRNr58 my 3d models ford ka 2009 3d studio 3ds]